Qual test

Group A

Group B

Group C

Group D

Subgroup 1
-Static @ 25°C

Subgroup 2
-Static @ Max Temp

Subgroup 3
-Static @ Min Temp

Subgroup 4
-Dynamic @ 25°C

Subgroup 5
-Dynamic @ Max Temp

Subgroup 6
-Dynamic @ Min Temp

Subgroup 7
-Functional @ 25°C

Subgroup 8A
-Functional @ Max Temp

Subgroup 8B
-Functional @ Min Temp

Subgroup 9
-Switching @ 25°C

Subgroup 10
-Switching @ Max Temp

Subgroup 11
-Switching @ Min Temp

Subgroup 1
-Physical Dimensions
-Internal Water Vapor

Subgroup 2
-Resistance to Solvents
-Internal Visual and Mechanical
-Bond Strength
-Die Shear or Substrate Attach Strength

Subgroup 3
-Solderability

Subgroup 4
-Lead Integrity
-Seal (Fine & Gross)
- Lid Torque

Subgroup 5
-End-Point Electrical
-Steady State Life
-End-Point Electrical
-Bond Strength

Subgroup 6
-End-Point Electrical
-Temperature Cycling
-Constant Acceleration
-Seal (Fine & Gross)
-End-Point Electrical

Subgroup 1
-Steady State Life
-End-Point Electrical

Subgroup 1
- Physical Dimensions

Subgroup 2
- Lead Integrity
- Seal (Fine & Gross)

Subgroup 3
-Thermal Shock
-Temperature Cycle
- Moisture Resistance
- Visual Examination
- Seal (Fine & Gross)
- End-Point Electrical

Subgroup 4
- Mechanical Shock
- Vibration, Variable Frequency
- Constant Acceleration
- Seal (Fine & Gross)
- Visual Examination
- End-Point Electrical

Subgroup 5
- Salt Atmosphere
- Visual Examination
- Seal (Fine & Gross)

Subgroup 6
- Internal Water Vapor

Subgroup 7
- Adhesion of Lead Finish

Subgroup 8
- Lid Torque

BLUE = Class Level B
RED = Class Level S

HI-Reliability
Special Products Divn offers, environmental and test services to MIL-STD-883 and Standard Military Drawing (SMD) compliant components. Customer supplied specification parts and Commercial devices are upgraded.

Force can supply devices manufactured on a certified Qualified Manufacturing Line (QML) facility and approved by the DSCC. ISO9002 registration assures full traceability demonstrates our dedication to quality products and services.

Force Technologies Ltd "Special Products Divn's business unit is dedicated to providing a prompt response to RFQ's, immediate order status and on-time delivery on all orders.

Class B and Class S Processing differences, historically military applications have utilised ceramic packaged microcircuits assembled and screened to either Class Level B or Class Level S (Space Level) as defined by MIL- STD- 883 Method 5004 with Quality Conformance Inspection QCI performed in accordance with MIL- STD- 883 Method 5005.

QML Class B Considerations Under MIL- PRF- 38535, a QML certified manufacturer is permitted to modify, substitute, or delete tests that do not improve the quality and/ or reliability of the finished device as defined by the applicable device specification. Therefore the end user of a Class B microcircuit should not assume that all screening detailed in MIL- STD- 883 Method 5004 and all quality conformance inspections detailed in Method 5005 are performed.

Force Technologies when specifying compliant Class B Processing identify certified (and listed by the Defense Supply Center Columbus (DSCC)) a manufacturer of QML Class B microcircuits (integrated circuits) in accordance with MIL- PRF- 38535 (General Specification For Manufacturing Integrated Circuits). All processing, screening, and Quality Conformance Inspection (QCI) is performed to Level B in compliance with the test methods of MIL- STD- 883, Microcircuits Test Method Standard, with exceptions as allowed by Paragraph 1.1 of MIL- PRF- 38535.

To enable customer satisfaction FT will provide a detailed SCD where full screening and manufacturing deatils are provided. Customers can specify additional parameter testing at any time in the manufacturing or testing process.